Case Study 1: Complete Home Renovation

Over a period of 4 years we have seen many changes to this home.. We originally installed a Bose Lifestyle 48 home theatre system and Pioneer plasma downstairs with Foxtel sent to the whole house via a modulated system.
Recently  we installed a Samsung LED screen downstairs, and shifted the Pioneer upstairs. The whole ground floor has been renovated.
These spectacular cabinets were designed and manufactured by shutemerlino design of Somerton Park.    

Case Study 2: Plasma Display in Holiday Home

Sometimes our job is pretty hard to take. We were asked  to install a plasma at a holiday house on the River Murray, so we headed off and had a most enjoyable day by the river.

Case Study 3: Complete Home Theatre - 
         HD Projector and 120" motorised screen

Components used in this project were Denon AVR3808 AV Receiver, Foxtel decoder,Pioneer DVD recorder, Pioneer Bluray player, Pioneer Laser disc, and a DVDO Edge video enhancer. The owner is an electrician, and we set up relays for lighting control. A Philips TSU9600 Pronto Universal remote and RF extender was used for total control of all components, projector, screen and lighting

Case Study 4: Reticulated Audio Video System

This installation required Foxtel, Bluray and a Beyonwiz PVR to be reticulated to another room via a component matrix switcher, allowing any combination of the above items to be viewed in either area . A Bose sound system was used in each area. Philips TSU9400 Pronto universal remotes were used in both areas, with wifi control to all components and between rooms. The extremely attractive cabinet was designed and manufactured bymigdesign of Welland SA 

MULTIPLE SCREEN SET UP
This job reqired the wall mounting of a plasma screen, and the installation
of a motorised projection screen and projector, the plasma being for day use and the projector for special occasions.

Case Study 5: Small Cavity Installation

This installation required mounting the plasma display on a wall adjoining two apartments. Only a small cavity was available through which to feed all cabling, including cabling for a 5.1 speaker system. The ceiling was high and we removed part of a flat roof, a solar heating panel and an air conditioning system to allow us to acheive this. All in all a very satisfying job.

Case Study 6: Complete Home Theatre in a Kitchen/Rumpus

This involved the installation and setup of a Bose Lifestyle system and the installation of a 50" plasma display...

Case Study 7: Complete Home Theatre Installation

This installation involved the custom installation of a Bose Lifestyle 38 Surround system and the fitting of a new cabinet. The Sony LCD display was mounted on an internal stud wall,which had to reinforced from the rear with new bearers. The screen was mounted on a reticulated bracket with 90 degree turn in either direction. Cable concealment was essential.

Case Study 8: Plasma and Sound System

This involved the installation of a plasma display system , a Pioneer receiver and a Bose speaker system. Video and Audio was sent thru the other rooms via a modulator.
.